Berikut kode-kode yang terdapat pada
ponsel-ponsel GSM Nokia, Sony Ericsson, Motorola, Samsung, BenQ-Siemens, LG,
Philips, Panasonic dan Alcatel.
Catatan: Ada beberapa kode yang hanya
dapat digunakan pada ponsel-ponsel tipe tertentu saja.
Nokia
1.
*#06# Menampilkan nomor IMEI (International Mobile Equipment Identity).
2.
*#0000# Menampilkan versi firmware.
3.
*#9999# Merupakan alternatif jika kode *#0000# tidak berfungsi.
4. *#8110# Menampilkan versi firmware
(Nokia 8110).
5. *#21# Melihat pengalihan untuk semua
panggilan ‘All calls’.
6. **21*nomor tujuan# Mengalihkan
panggilan ke nomor yang dituju untuk semua panggilan.
7.
**61*nomor tujuan# Mengalihkan panggilan ke nomor yang dituju untuk
panggilan yang tidak terjawab.
8. **67*nomor tujuan# Mengalihkan
panggilan ke nomor yang dituju untuk panggilan ketika sedang sibuk.
9. *#61# Melihat nomor pengalihan karena
tidak dijawab ‘Call divert’.
10. *#62# Melihat nomor pengalihan karena
diluar jangkauan ‘Call divert’ dan mengetahui kemana nomor tersebut dialihkan.
11. *#67# Melihat nomor pengalihan karena
sibuk ‘Call divert’ dan mengetahui kemana nomor tersebut dialihkan.
12. *#2820# Menampilkan alamat IP
Bluetooth.
13. *#30# Menampilkan nomor pribadi.
14. *#43# Melihat status ‘Call waiting’.
15. *#62209526# atau *#MACOWLAN
Menampilkan alamat MAC WLAN.
16. *#67705646# Mengganti operator logo
(tipe 3310, 3330).
17. *#73# Mereset timer ponsel dan skor
game.
18. *#746025625# Menampilkan status SIM
Clock. Jika ponsel anda mendukung fungsi power saving akan muncul tulisan “SIM
Clock Stop Allowed”, itu berarti anda bisa mendapatkan waktu terbaik untuk
standby.
19. *#7370# atau *#RESO# Mereset ke
setingan awal (pabrikan), data-data akan terhapus
20. *#7760# Menampilkan kode pabrik/produk.
21. *#7780# atau *#rst0* Mereset ke
setingan awal (pabrikan), data-data tidak akan terhapus.
22. *#92702689# atau *#war0anty#
Menampilkan nomor serial, tanggal pembuatan, tanggal pembelian, tanggal
terakhir servis (000 jika belum pernah diperbaiki) dan transfer user data. Pada
beberapa ponsel setelah menggunakan kode ini anda harus merestart ponsel.
23. *#2640# Menampilkan kode pengamanan
ponsel.
24. *#3370# Mengaktifkan EFR (Full Rate
Codec), kualitas suara terbaik namun pemakaian baterai menjadi boros.
25. #3370# Untuk menonaktifkan EFR.
26.
*#4720# Mengaktifkan Half Rate Codec, kualitas suara terendah namun
pemakaian baterai menjadi lebih hemat.
27. #4720# Untuk menonaktifkan Half Rate
Codec.
28. 10# Cara cepat untuk membuka nomor
kontak yang tersimpan di kartu SIM berdasarkan nomor urut. Contoh angka 10
adalah nomor urut kontak.
29. #pw+1234567890+1# Mengunci status
provider, gunakan tanda “*” untuk memisahkan antara “p,w” dan tanda “+”.
30. #pw+1234567890+1# Mengunci status
provider, gunakan tanda “*” untuk memisahkan antara “p,w” dan tanda “+”.
31. #pw+1234567890+2# Mengunci status
network, gunakan tanda “*” untuk memisahkan antara “p,w” dan tanda “+”.
32. #pw+1234567890+3# Mengunci status
country, gunakan tanda “*” untuk memisahkan antara “p,w” dan tanda “+”.
33. #pw+1234567890+4# Mengunci status
kartu SIM, gunakan tanda “*” untuk memisahkan antara “p,w” dan tanda “+”.
Sony Ericsson
1.
*#06# Menampilkan nomor IMEI (International Mobile Equipment Identity).
2. *#0000# atau 0000 Mereset kembali ke
bahasa inggris.
3. >*<<*<* Melihat service
menu dan versi software. Tekan tombol Yes berulang kali untuk melihat semua
data software dan tekan > untuk melihat semua teks yang terdapat pada
ponsel.
4. <**< Untuk mengunci SIM Card
agar tidak bisa mengganti SIM Card. Untuk membukanya dengan unlock code.
5. *<<* Mengunci layanan provider.
6. **04*0000*0000*0000# Mengakses ponsel
tanpa SIM Card.
7.
0# Melihat nomor terakhir yang ditelepon.
Motorola
1. *#06# Menampilkan nomor IMEI
(International Mobile Equipment Identity).
2. *#303# OK Mengubah ke bahasa inggris.
3. *#300# OK Menampilkan versi software
(SW and HW Version).
4. *#301# OK Test keypad.
5.
1234 OK Kode default ponsel.
6. *#311# OK Merubah kode ponsel default.
7. ***113*1* OK Net Monitor ON.
8. **113*1* OK Net Monitor OFF.
9. *#304# OK Set Off engineering mode.
10. *#304*1998072# OK Set On engineering
mode.
11. *#307* OK Engineering test mode.
12. *#400# OK ADC call val.
13. 19980722 OK Master unlock code for
phone and sim lock.
14. *#0000# OK Setting and restore.
15. *#402# OK Contrast
16. *#305# OK Location 1
Samsung
1. *#06# Menampilkan nomor IMEI
(International Mobile Equipment Identity).
2. *#9999# atau *#9998*9999# Menampilkan
versi software.
3. *#9999# atau *#9998*8888# Menampilkan
versi hardware.
4. *#9998*76# Menampilkan nomor produksi.
5. *#9998*288# atau *#0288# Mengecek
status baterai.
6. *#0246# atau *#0377# Menampilkan
kapasitas ruang penyimpanan / memori.
7. *#9998*782# atau *#0782# Menampilkan
tanggal dan waktu alarm.
8. *#8999*638# Menampilkan informasi
jaringan telepon.
9. *#9998*523# atau *#0523# Mengatur
kontras layar.
10. *#8999*5646# Mengubah logo operator.
11. *#0289# Tes ringtone.
12. *#9998*842# atau *#0842# Tes vibrate.
13. *#9998*289# atau *#0289# Mengubah
suara alarm.
14. *#9998*746# atau *#0746# Melihat
informasi kartu SIM
15. *2767*2878# Mengunci ponsel.
16. *2767*3855# Mereset memori, jangan
lupa mencabut kartu SIM.
17. *#0324# Net Monitor
18. *#0001# Display RS232 serial
communication parameter setup.
19. *9266# Display received channel
number and received intensity.
20. *#9998*377# atau *#0377# Software
error LOG (wrong display of EEPROM).
21. *#9998*778# atau *#0778# SIM Service
Table.
22. *#0837# Instruction Software.
23. *#0001# Show Serial Parameter.
24. *#9998*968# View Melody Alarm.
25. *#9998*585# Non Volatile Memory.
26. *#3243948# Digital Audio Interference
off.
27. *#32436837# Digital Audio
Interference.
28. *#9998*4357# Help Menu.
29. *#9998*5282# Java Menu.
30. *2767*5282# Java Reset.
31. *2767*927# WAP Reset.
32. *2767*63342# Reset Media.
33. *#9999#0# Monitor Mode.
Siemens
1. *#06# Menampilkan nomor IMEI
(International Mobile Equipment Identity).
2. *#0000# Mengembalikan ke bahasa
default.
3. **05*PUK*newPIN*newPIN# Deblock PIN
using PUK.
4. **052*PUK2*newPIN2*newPIN2# Deblock
PIN2 using PUK2.
5. **04*old_PIN*new_PIN*new_PIN# Mengubah
PIN.
6. **042*old_PIN2*new_PIN2*new_PIN2#
Mengubah PIN2.
7. *31# Menyembunyikan nama/nomor telepon
pada ponsel penerima (CLIR).
8. #31# Menonaktifkan CLIR.
9. *#31# Mengecek status CLIR.
10. *30# Menampilkan nama/nomor telepon
pada ponsel penerima (CLIP).
11. #30# Menonaktifkan CLIP.
12. *#30# Mengecek status CLIP.
13. *43# Mengaktifkan Call Waiting/Call
Hold.
14. #43## Menonaktifkan Call Waiting.
15. *#43# Mengecek status Call Wating.
16. *#0001# lalu tekan tombol hijau
(Call) Mengubah bahasa menggunakan kode. Angka 0001 adalah kode untuk bahasa
inggris. Kode: 0030 (Yunani), 0031 (Belanda), 0032 (Perancis), 0034 (Spanyol),
0039 (Itali), 0049 (Jerman), 0090 (Turki).
17. *#0606# Shows if the phone is locked
to any network (Use without SIM card).
BenQ-Siemens
1. *#06# Menampilkan nomor IMEI
(International Mobile Equipment Identity).
2. *#0000# Mengembalikan ke bahasa
default.
3. *#0001# lalu tekan tombol hijau (Call)
Mengubah bahasa menggunakan kode. Angka 0001 adalah kode untuk bahasa inggris.
Kode: 0030 (Yunani), 0031 (Belanda), 0032 (Perancis), 0034 (Spanyol), 0039
(Itali), 0049 (Jerman), 0090 (Turki)
4. *#9999# Mereset ke setingan awal
(pabrikan).
5. *#300# Mengecek software.
6. *#301# Mengecek hardware.
LG
1. *#06# Menampilkan nomor IMEI
(International Mobile Equipment Identity).
2. *#07# Menampikan nomor IMEI dan versi
software (LG 510).
3. *8375# Menampilkan versi software (LG
B1200).
4. #PWR668 Test pabrikan (LG B1200).
5. 1945#5101# Simlock menu (LG B1200).
6. 2945#*5101# Simlock menu (LG 510W,
5200)
7. 2945#*70001# Simlock menu (LG
7020,7010)
Philips
1.
*#06# Menampilkan nomor IMEI (International Mobile Equipment Identity).
2.
*#3353*# Mereset ponsel.
3.
*#7337*# Mereset ponsel (Master reset), kartu SIM dicabut dulu..
4.
*#337*# Mengaktifkan/menonaktifkan EFR.
5.
*#7693# Mengaktifkan/menonaktifkan Sleep Mode. Aktifkan saja untuk
menghemat konsumsi baterai ketika ponsel sedang tidak dipakai.
6.
*#8463*# Menampilkan beberapa informasi Sleep Mode: Wake, Sleep Req.,
Sleep.
7.
*#2286*# Mengaktifkan data baterai.
8. *#7948*# Mematikan ponsel.
9.
*#7728*# Menampilkan RSAV.
10.
*#7524*# Menampilkan KCGPRS.
11.
*#7562*# Menampilkan SIM Phase.
12.
*#7629*# Menampilkan POOL MAX.
13.
*#7632*# Menampilkan Code Bugging dari sleep mode.
14.
*#7733*# Menampilkan Cluster aktif.
15.
*#7343*# Menampilkan kode Cluster.
16.
*#7352*# Menampilkan registrasi software.
17.
*#7763*# Menampilkan informasi produk.
18.
*#7766*# Menampilkan versi produk.
19.
*#7326*# Menampilkan pilihan aksesoris untuk vibrator.
20.
*#7276*# Mengaktifkan GPRS Attach.
21.
*#7287*# Mengaktifkan GPRS Attached.
22.
*#7288*# Mengaktifkan GPRS Try Attached.
23.
*#7271*# Mengaktifkan GPRS Kelas 1
24.
*#7274*# Mengaktifkan GPRS Kelas 4.
25.
*#7252*# Mengaktifkan GPRS Kelas B.
26.
*#7224*# Mengaktifkan GPRS Kelas C.
27.
*#7222*# Mengaktifkan CSD GSM Kelas C.
28.
*#7762*# Melakukan seting SMS bearer GPRS.
29.
*#8377*# Menampilkan versi software.
30. *#3377*# Menampilkan kondisi EEPROMP.
31. *#2254# Status Register.
32. *#2255# Active/Deactive “Debug Call”,
when activated, make a call to a busy line an the phone will display some
hex-codes on the display.
33. *#2558# The time in days, hours, and
minutes you are connected to the net..
34.
*#7489*# atau *#1234*# Security Code.
35. *#7378*# Name, Length, SIM Phase.
36.
*#3333*# Blocking list.
Panasonic
1.
*#06# Menampilkan nomor IMEI (International Mobile Equipment Identity).
2. **7370# Memformat ulang.
Alcatel
1. *#06# Menampilkan nomor IMEI
(International Mobile Equipment Identity).
2. ###847# Reset full.
3.
###765*02# Memblokir panggilan masuk atau keluar (Add barring groups).
4.
###765*78# Menonaktifkan Barring groups.
5.
###765*05# Menonaktifkan/mengunci status network.
6.
###765*07# Mengaktifkan status network.
7.
000000* Net Monitor.
*#9998*228# : Battery status (capacity,
voltage, temperature)
*#9998*246# : Program status
*#9998*289# : Change Alarm Buzzer
Frequency
*#9998*324# : Debug screens
*#9998*364# : Watchdog
*#9998*377# : EEPROM Error Stack – Use
side keys to select values. Cancel and ok.
*#9998*427# : Trace Watchdog
*#9998*523# : Change LCD contrast – Only
with version G60RL01W
*#9998*544# : Jig detect
*#9998*636# : Memory status
*#9998*746# : SIM File Size
*#9998*778# : SIM Service Table
*#9998*785# : RTK (Run Time Kernel)
errors – if ok then phn is reset, info is put in memory error.
*#9998*786# : Run, Last UP, Last DOWN
*#9998*837# : Software Version
*#9998*842# : Test Vibrator – Flash the
screenligth during 10 seconds and vibration activated.
*#9998*862# : Vocoder Reg – Normal,
Earphone or carkit can be selected
*#9998*872# : Diag
*#9998*947# : Reset On Fatal Error
*#9998*999# : Last/Chk
*#9998*9266# : Yann debug screen (=Debug
Screens?)
*#9998*9999# : Software version
If the up Codes doesn’t work, you should
change *#9998* to *#0. i.e. *#9998*523# change to *#0523#. An other thing that
will help is to remove your SIM card. *0001*s*f*t# : Changes serial parameters
(s=?, f=0,1, t=0,1) (incomplete)
*0002*?# : unknown
*0003*?# : unknown
SP-unlock SGH-600 (and also SGH-Sgh-600)
*2767*3855# : Full EEPROM Reset ( THIS
CODE REMOVES SP-LOCK!! )
But also changes IMEI to
447967-89-400044-0. (Doing this is illegal)
*2767*2878# : Custom EEEPROM Reset
*These codes have been tested with
version FLD_2C6 G60SB03X of Samsung SGH-600
for d500
*#11[quote]11# S/W Version
*#1234# Firmware Version
*#2222# H/W Version
*#8999*8376263# All Versions Together
*#8999*8378# Test Menu
*#4777*8665# GPSR Tool
*#8999*523# LCD Brightness
*#8999*377# Error Menu
*#8999*327# EEP Menu
*#8999*3825523# Don’t Know.
*#8999*667# Debug Mode
*#92782# PhoneModel (Wap)
#*5737425# JAVA Mode
*#2255# Call List
*#232337# Bluetooth MAC Adress
*#5282837# Java Version
#*4773# Incremental Redundancy
#*7752# 8 PSK uplink capability bit
#*7785# Reset wakeup & RTK timer
cariables/variables
#*1200# ????
#*7200# Tone Generator Mute
#*3888# BLUETOOTH Test mode
#*#8999*324# ??
#*7828# Task screen
#*5111# ??
#*#8377466# S/W Version & H/W Version
#*2562# Restarts Phone
#*2565# No Blocking? General Defense.
#*3353# General Defense, Code Erased.
#*3837# Phone Hangs on White screen
#*3849# Restarts Phone
#*3851# Restarts Phone
#*3876# Restarts Phone
#*7222# Operation Typ: (Class C GSM)
#*7224# !!! ERROR !!!
#*7252# Operation Typ: (Class B GPRS)
#*7271# CMD: (Not Available)
#*7274# CMD: (Not Available)
#*7337# Restarts Phone (Resets Wap
Settings)
#*2787# CRTP ON/OFF
#*2886# AutoAnswer ON/OFF
#*3737# L1 AFC
#*5133# L1 HO Data
#*7288# GPRS Detached/Attached
#*7287# GPRS Attached
#*7666# White Screen
#*7693# Sleep Deactivate/Activate
#*7284# L1 HO Data
#*2256# Calibration info? (For CMD set
DEBUGAUTONOMY in cihard.opt)
#*2286# Databattery
#*2527# GPRS switching set to (Class 4,
8, 9, 10)
#*2679# Copycat feature Activa/Deactivate
#*3940# External looptest 9600 bps
#*4263# Handsfree mode
Activate/Deactivate
#*4700# Please use function 2637
#*7352# BVMC Reg value (LOW_SWTOFF,
NOMINAL_SWTOFF)
#*2558# Time ON
#*3370# Same as 4700
#*3941# External looptest 115200 bps
#*5176# L1 Sleep
#*7462# SIM Phase
#*7983# Voltage/Freq
#*7986# Voltage
#*8466# Old Time
#*2255# Call Failed
#*5187# L1C2G trace Activate/Deactivate
#*5376# DELETE ALL SMS!!!!
#*6837# Official Software Version:
(0003000016000702)
#*7524# KCGPRS: (FF FF FF FF FF FF FF FF
07)
#*7562# LOCI GPRS: (FF FF FF FF FF FF FF
FF FF FF FF FE FF 01)
#*2337# Permanent Registration Beep
#*2474# Charging Duration
#*2834# Audio Path (Handsfree)
#*3270# DCS Support Activate/Deactivate
#*3282# Data Activate/Deactivate
#*3476# EGSM Activate/Deactivate
#*3676# FORMAT FLASH VOLUME!!!
#*4760# GSM Activate/Deactivate
#*4864# White Screen
#*5171# L1P1
#*5172# L1P2
#*5173# L1P3
#*7326# Accessory
#*7683# Sleep variable
#*8465# Time in L1
#*2252# Current CAL
#*2836# AVDDSS Management
Activate/Deactivate
#*3877# Dump of SPY trace
#*7728# RSAV
#*2677# Same as 4700
#*3797# Blinks 3D030300 in RED
#*3728# Time 2 Decod
#*3725# B4 last off
#*7372# Resetting the time to DPB
variables
#*7732# Packet flow context bit
Activate/Deactivate
#*6833# New uplink establishment
Activate/Deactivate
#*3273# EGPRS multislot (Class 4, 8, 9,
10)
#*7722# RLC bitmap compression
Activate/Deactivate
#*2351# Blinks 1347E201 in RED
#*4472# Hysteresis of serving cell: 3 dB
#*2775# Switch to 2 inner speaker
#*9270# Force WBS
#*7878# FirstStartup (0=NO, 1=YES)
#*3757# DSL UART speed set to (LOW, HIGH)
#*8726# Switches USBACM to Normal
#*8724# Switches USBACM to Generator mode
#*8727# Switches USBACM to Slink mode
#*8725# Switches USBACM to Loop-back mode
#*3838# Blinks 3D030300 in RED
#*2077# GPRS Switch
#*2027# GPRS Switch
#*0227# GPRS Switch
#*0277# GPRS Switch
#*22671# AMR REC START
#*22672# Stop AMR REC (File name:
/a/multimedia/sounds/voice list/ENGMODE.amr)
#*22673# Pause REC
#*22674# Resume REC
#*22675# AMR Playback
#*22676# AMR Stop Play
#*22677# Pause Play
#*22678# Resume Play
#*77261# PCM Rec Req
#*77262# Stop PCM Rec
#*77263# PCM Playback
#*77264# PCM Stop Play
#*2872# CNT
*#8999*283# ???
#*22679# AMR Get Time
*288666# ???
*2886633# ???
*#8999*364# Watchdog
nokia cdma
*3001#12345#
LG CDMA SECRETS CODES
Field Test MENU > 0 > 000000 >
Field Test Other Programming Secrets:
LGC-300 programming:
menu + 9 and enter SPC: “000000″ or may
be other SPC typed by user. A-Key: press STO for some time while you can see
special code enter zone. Type 2539** and enter A-key
LGC-330W programming:
menu + 4 + 0 and enter SPC: “000000″ or
may be other SPC typed by user. A-Key: type 2539** and enter A-key
LGC-800W /500 programming:
menu + 0 and enter SPC: “000000″ or may
be other SPC typed by user. A-Key: type 2539** and enter A-key
LGC-510 programming:
menu + 3 + 0 and enter SPC: “000000″ or
may be other SPC typed by user. A-Key: type 2539** and enter A-key
LG1010, LG4NE1, TP2200, TP2100,
Touchpoint, SB/DB, TP1100 and TP5200
Press ## Enter the OTKSL Scroll to SAVE
and press OK Scroll to MIN and press OK Enter 10 digit MIN scroll to SAVE and
press OK Scroll to SID and press OK (Skip on 4NE1 go to RESET PHONE and press
OK to complete) Enter SID (4654) and scroll to SAVE and press OK Programming is
complete
LG5350
Enter ## and enter the OTKSL and press
the left soft key under the word “Save” At the Service Program display select
Mobile Phone # and press the OK in the center of the 4 way navigation key Enter
the 10 digit MIN and press OK Scroll down to 4. Advanced and press OK Scroll to
NMSI and press OK Enter the MSID and press OK Scroll down to 9. Amps Phone #
and press OK Enter the MSID and press OK
Press the END key
MOTOROLA PROGRAMING CODES
Analog Models
Changing the Banner: #PROGRAM# or [Fcn]
0000000000000 (13 0’s)
Field Test: [Fcn] 0 0 * * TESTMODE [Sto]
Reset Timers: Follow the Field Test
procedure above and then #32#
Alternative Programming Menu: #55#
(Not sure): # [SID code]#* SEND
Programming of various other models:
V60c Programming Mode:
74663 # [Menu] [Menu] (you will need the
programming code)
Field Test: [Menu] 073887 * (you will
need the security code — try 000000)
To deactivate field test: Power phone up,
hit MENU and the left button (should bring up the menu). There’s a menu option
for test-mode and at this point you can turn the menu off and return the phone
to normal. Alternatively press menu and then the nearest button to the left
(Phone book button) quickly and it will take you back to the main screen and
your phone will look normal.
StarTac 7790
Field Test: [Fcn] 0 0 * * TESTMODE [Sto]
StarTac 7760, 7860
Field Test: [Fcn] 0 0 * * TESTMODE [Sto]
Service Menu: [Fcn] 0 000000 000000 RCL
Complete system test (most models):
(Phone OFF), Hold down any row of keys (1+2+3, 4+5+6, etc) and turn the phone
ON
To access the diagnostic mode on the I30:
#, *, MENU, JOYSTICK-RIGHT (Do these keystrokes fast)
To access the diagnostic mode on any of
the older iDEN phones (pre-i1000): VOLUME DOWN, MENU, MENU, MENU, LEFT, MENU,
MENU, LEFT (this is the reverse of the test menu routine)
To access the diagnostic mode on any of
the new models (i1000+, i700+, i550+, etc): Hold down any three keys in a row
across.
The unit will enter the test mode and can
be stepped through the various functions with the keys and buttons. At the end
of the test, power cycle the unit to return to normal function. This test will
check various phone functions, including LCD display, speaker, earphone,
microphone, LEDs, vibrator, backlight and all of the buttons and keys for the
newer models
SAMSUNG CDMA SECET CODES
Older Models:
NAM Programming: 47*869#08#9
Test mode: *759#813580 OR 5809540*45680
Exit Test Mode: 02 A-Key: menu + 0,
code 25##
Samsung SPH-T100
MENU 820 > 810325
Samsung SCH-3500
MENU 820 > 295184
Programming of various other models:
Samsung A500
Enter ## and the 6 digitOTKSL
SERVICE MENU will appear and 1.Basic will
be highlighted
Press OK Device will display NAM CDMA/
Phone Number
Enter 10 digit MIN Press OK (3 times)
Display will return to Service Menu.
Press END. Programming is complete
Samsung N240 and N400
Enter ## and type in the 6 digit OTKSL
The display will show SVC MENU and 1.
Phone Number
Press OK Enter the 10 digit MIN and press
OK
The display will show NAM with Home SID
on the second line (Note: SID is no longer used)
Press OK
The display will return to the SVC MENU
Press END to complete the programming
Samsung N300
Press ## followed by the OTKSL
SVC menu will be displayed
Press 1 for Phone #
Enter the 10 digit MIN and press OK
MIN that was entered will be displayed
press OK
SVC Menu will display press 3 for NAM
Enter the 4 digit Home SID press OK
Press END and handset will power cycle
Samsung i300
Tap on the Phone Icon with stylus
Press #907*9#0 ENTER LOCK should appear
on screen
ENTER OTKSL
SVC MENU will appear press 1
Enter 10 digit MIN and then press SAVE
Press SAVE again
Press 3 and then press SAVE 6 times
Enter the HOME SID and press SAVE once
Press END key twice
Samsung A400 and A460
Enter ## and OTKSL
Press 1 for Basic at MENU (1 of Phone #
when using the MSL)
Enter 10 digit MIN and press OK
At 1.Basic Menu press the END key
Handset will power cycle
Samsung 3500, 8500, 6100, and N200
Press MENU
Press 6 0 (3500) 8 2 0 (8500/6100/N200)
Enter OTKSL
Press 1 at SVC MENU Screen
Enter MIN and press OK
Press OK 4 times
Enter SID (4654) and press OK
Press END key
Programming is complete
gsm NOKIA SECRET CODES
Nokia CodesThese Nokia codes will work on
most Nokia mobile phones, however we accept no responsibility of any kind for
damage done to your phone whilst trying these Nokia secret codes.
Nokia code Code function
*3370# This Nokia code activates Enhanced
Full Rate Codec (EFR) – Your Nokia cell phone uses the best sound quality but
talk time is reduced my approx. 5%
#3370# Deactivate Enhanced Full Rate
Codec (EFR)
*#4720# Activate Half Rate Codec – Your
phone uses a lower quality sound but you should gain approx 30% more Talk Time
*#4720# With this Nokia code you can
deactivate the Half Rate Codec
*#0000# Displays your phones software
version, 1st Line : Software Version, 2nd Line : Software Release Date, 3rd
Line : Compression Type
*#9999# Phones software version if
*#0000# does not work *#06# For checking the International Mobile Equipment
Identity (IMEI Number)
#pw+1234567890+1# Provider Lock Status.
(use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+2# Network Lock Status.
(use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+3# Country Lock Status.
(use the “*” button to obtain the “p,w” and “+” symbols)
#pw+1234567890+4# SIM Card Lock Status.
(use the “*” button to obtain the “p,w” and “+” symbols)
GSM SAMSUNG SECRET CODES
*#06# -> Show IMEI
*#9999# -> Show Software version
*#0837# -> Show Software Version
(instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates the smiley when
charging.
*#9998*228# -> Battery status (capacity,
voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer
Frequency
*#9998*324# -> Debug screenslect
values. Cancel and ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast –
Only with version G60RL01W
*#9998*544# -> Jig detectService Table
*#9998*785# -> RTK (Run Time Kernel)
errors – if ok then phn is reset, info is put inmemory error.
*#9998*786# -> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator – Flash
the screenligth during 10 seconds and vibrationactivated.
*#9998*862# -> Vocoder Reg – Normal,
Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk
*#9998*9266# -> Yann debug screen
(=Debug Screens?)
*#9998*9999# -> Software version
*0001*s*f*t# -> Changes serial
parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown SP-unlock SGH-600
and SGH 2100
*2767*3855# -> Full EEPROM Reset (
THIS CODE REMOVES SP-LOCK!! ) But also changes IMEI to 447967-89-400044-0
*2767*2878# -> Custom EEEPROM Reset
These codes has been tested with version FLD_2C6 G60SB03X of Samsung SGH-600
type 8889 instead of 9998.
GSM MOTOROLA SECRET MOBILE CODES
Motorola
IMEI number: * # 0 6#
Net Monitor ON: * * * 1 1 3 * 1 * [OK]
Net Monitor OFF: * * * 1 1 3 * 1 * [OK]
* – press this until box shown up
To activate RBS:
(pause means the * key held in until box
appears)
[pause] [pause] [pause] 1 1 3 [pause] 1
[pause] [ok]
You now have to press the [MENU] and
scroll to the ‘Eng Field Options’ function with the keys, and enable it.
To de-activate RBS,
[pause] [pause] [pause] 1 1 3 [pause] 0
[pause] [ok]
This only works with some versions of
software. Please report what works and doesn’t for you.
Reported working, by country:
d460: IT
6200 Flare: UK (Orange), AU
7500: IT (model: F16 HW: 5.2 SW: 2.1)
8200: ES, AU, NL, BE
8400: IT, NL
8700: AU, IT, SG, DE, ES, ZA
Uses of RBS:
Distance From Base Station – Place a
call, when it is answered, press [MENU] until ‘Eng Field Option’ is displayed,
press [OK], select ‘Active Cell’, press [OK], press [MENU] until ‘Time Adv xxx’
appears, where xxx is a number. Multiply this number by 550, and the result is
the distance from the RBS (Radio Base Station), in meters.
Signal Quality – press [MENU] until ‘Eng
Field Option’ is displayed, press [OK], select ‘Active Cell’, press [OK], press
[MENU] until ‘C1′ appears. This is the signal quality. If it becomes negative
for longer than 5 seconds, a new cell is selected.
SONY ERICSSON SECRET CODE
General Secrets
IMEI (International Mobile Equipment
Identity): *#06#
Firmware Version: >*<<*<*
Programming Checks:
>*<<*<*> or >*<<*<*>
Accessing the phone without a SIM card:
**04*0000*0000*0000# then on ‘Wrong Pin’ No
Reset English Menu: *#0000#
300, 600, 700 Series
Programming Menu (Short): 987 + >
Programming Menu (Long): 923885 + >
Field Test: 904090 + > (to exit 904090
+ >)
Phone Test: 904059 + > (to exit 3 +
<)
Phone Reset: 904060 + >
CDMA Mode: 904093 + menu
Analog Mode: 904095 + menu DM mode 904959
+ menu
GSM PHILIPS SECRET CODES
Philips GENIE
To view IMEI number *#06#
*#2254*# is the statusregister: C, BS,
RR, MMI, CREAT.
*#2255*# will activate and deactivate the
“DEBUG CALL”-Mode
*#2558*# will display the time in
days,hours and minutes you are connected to the GSM network
To force a reconnection to the network,
type : *#2562*#
To view and modify the Security Code of
the phone, type: *#7489*#
To view some info about your SIM card
like the phase level, the name, type: *#7378*#
To obtain information on SIM lock, Init
and Flags, press: *#3377*#
To activate or deactivate Sleep Mode:
*#7693*#
To get info about Sleep Mode: *#8463*#
Philips FIZZ
IMEI: *#06#
Lock Code: *#1234#
Software Version
To find software version, enter *#8377*#
The output will look something like:
Version : 0916 – EEPROM : 00000000-00 –
TDA : 2445 – KISS : 0502 SIM-LCK
..or extended software version *#5644*#
output:
Version : 09162205 – EEPROM : 00000000-00
– TDA : 2445 – KISS : 0502 SIM-LCK
SM ALCATEL SECRET MOBILE CODES
ALCATEL
* # 0 6 # : IMEI number
* # 0 6 # : Software version
0 0 0 0 0 0 * : Net Monitor
PINOUTS AND CODES FOR PANASONIC MOBILES
Panasonic G500
IEMI:
To view IMEI number *#06#
——————————————————————————–
PINOUTS
1 – Ground
2 – TX_Audio
3 – Audio_Ground
4 – HF_ON (L=ON) -> L=H/F ON
5 – AOP_Sense <- Data Adaptor Select
6 – Serial_Up <- UART up
(9600,33.8kbps)
7 – Serial_Down -> UART down
8 – External_Power <- POWER FOR
CHARGING
9 – Ground
10 – RX_Audio
11 – Radio_Mute -> L=MUTE
12 – HF_Sense <- L=H/F MODE
13 – Reserved L=FLASH WRITE ENABLE
14 – Ignition <- H=ON
15 – Logic_Power -> H=HANDSET ON
16 – PAON -> Power Amplifier Control
Signal.
**************************************************
**
Nokia 3310 Secret codes
contributed by: mef
*#06# To find IMEI (International Mobile
Equipment Identity)
*#7780# Restores Factory
Settings..(Memory, language, counters not included)
*#3110# For checking the phone’s software
(SW) – called firmware revision information.
*#746025625# [*#sim0clock#] To check if
the Sim-Clock can be Stopped (Sim-clock-stop is a kind of standby mode which
will save battery time)
*#92702689# [*#war0anty#] Phone asks
‘warranty code:’
6232 (OK) Displays the Month and Year of
Manufacture
9268 (OK) Displays Serial Number
7332 (OK) Displays the date of the last
repairment – if found
7832 (OK) Displays (if found) the date
where the phone was purchased
37832 (OK) Set the Purchasing Date MMYY
(This date can be set only once!)
87267 (OK) Transfers ALL phone numbers,
Logo’s, and ringtones from other gsm phones
Nokia 101 cell phone lockcode
Jul, 10 2000 – 02:35
Nokia 101 cell phones set up by Bell
Mobility in Toronto can have their lock code circumvented by the following
method:
Type: * 3001 # 12345 [STO] 00
Wait for: NOT DONE
Type: [RCL] 01
Clear old lock code (the last four
digits) and enter a new lock code. Be very careful not to delete other
characters.
Type: [STO] 01 [STO]
Turn power off.
Nokia 9000/9000i
Nov, 25 2000 – 22:41
To view IMEI number *#06#
To view Software Version enter *#8110#
Latest Version is under Phone Info.
To view Week and Year of manufacture
enter *#3283#
Samsung SGH-600 / SGH-2100
Secret Codes
*#06# -> Show IMEI
*#9999# -> Show Software Version
*#0837# -> Show Software Version (instructions)
*#0001# -> Show Serial Parameters
*#9125# -> Activates the smiley when
charging.
*#9998*228# -> Battery status
(capacity, voltage, temperature)
*#9998*246# -> Program status
*#9998*289# -> Change Alarm Buzzer
Frequency
*#9998*324# -> Debug screens
*#9998*364# -> Watchdog
*#9998*377# -> EEPROM Error Stack –
Use side keys to select values. Cancel and ok.
*#9998*427# -> Trace Watchdog
*#9998*523# -> Change LCD contrast –
Only with version G60RL01W
*#9998*544# -> Jig detect
*#9998*636# -> Memory status
*#9998*746# -> SIM File Size
*#9998*778# -> SIM Service Table
*#9998*785# -> RTK (Run Time Kernel)
errors – if ok then phn is reset, info is put in memory error. *#9998*786#
-> Run, Last UP, Last DOWN
*#9998*837# -> Software Version
*#9998*842# -> Test Vibrator – Flash
the screenligth during 10 seconds and vibration activated.
*#9998*862# -> Vocoder Reg – Normal,
Earphone or carkit can be selected
*#9998*872# -> Diag
*#9998*947# -> Reset On Fatal Error
*#9998*999# -> Last/Chk
*#9998*9266# -> Yann debug screen
(=Debug Screens?)
*#9998*9999# -> Software version
*0001*s*f*t# -> Changes serial
parameters (s=?, f=0,1, t=0,1) (incomplete)
*0002*?# -> unknown
*0003*?# -> unknown
SP-unlock SGH-600 and SGH 2100
*2767*3855# -> Full EEPROM Reset (
THIS CODE REMOVES SP-LOCK!! )
But also changes IMEI to
447967-89-400044-0, To restore your old IMEI use the IMEI program found on the
software page.
*2767*2878# -> Custom EEEPROM Reset
These codes has been tested with version
FLD_2C6 G60SB03X of Samsung SGH-600
Samsung 811
Jul, 08 2000 – 01:24
47*869#08#9
- unlock code / change roaming code / ID
SIEMENS S1 / S3 / S3 COM / S4
To view the software date and else with
S3 com, S4, S4Power
press with SIM removed *#06# and left
softkey.
To view some other stuff with S4Power
press with SIM removed *#06# and left
softkey twice.
To view the software date with S3 com,
S4, S4Power
press with SIM installed menu 98 and left
softkey twice.
ACTIVATE MONITOR MODE
Siemens S1/S3
Menu, 9 (Phone Options), 7 (Phone
Status), Left Display Button (left MENU key),
5553756, HangUp Button (Red HandSet key)
Siemens S3 COM/S4
Menu, 9 (Phone Options), 7 (Phone
Status), Left Display Button
(left MENU key), 7684666, HangUp Button
(Red HandSet key)
Note: Now Monitor should appear at the
bottom of the Network Options menu.
MONITOR MODE
Pressing the right Display Button when in
monitor mode will toggle into 1 and 2 modes
Pressing the right Display Button when in
monitor mode will show a
list of the six cells with the strongest
signals.
Test Mode Indicators: (* = only available
when call in progress )
CH Channel Number
RX Signal Strength (dB)
N NCC (Colour Code)
B BCC (Colour Code)
CI Cell ID (in Hex)
C1+ How long before phone does forced
hand over.(see RX and RXAM)
LAI Location Area Identity. Display
Network ID code(42F010 = 240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Receive signal strength cut-off
point
TS* Time Slot Number
TA* Timing Advance. Distance from tower
in Km X 2
PL* Power Level
SIEMENS S1
Here’s a trick to play Tetris, also known
as Klotz on a Siemens S1.
Turn the phone on. Enter PIN. Before the
telephone has logged in to the
your GSM net do the following steps.
1: Choose F 9 (function settings)
2: Choose send own number and push the
right button for choose.
3: Push 9
USE 2 as < and 8 as > , rotate the
klotz with 5 and drop with 4.
I have just heard from one of the
programmers of the phone that Tetris
was in the phone during development, but
it was removed before it was produced.
Apparantly someone has the patent on
games in mobile phones and Siemens
didn’t want to pay the licensing fees. It
was either in Menu F-9-9 or it’s not there at all.
Siemens C 25
Secret Codes
SP unlock *#0003*(secret code 8 digits)#
*#06# for checking the IMEI
(International Mobile Equipment Identity)
Resets language to automatic selection :
* # 0000 # then Green button
Pin Out
1- GND
2- SB
3- POWER
4- NC
5- TX
6- RX
7- CLOCK
8- DATA
9- GND MIC
10- HF MIC
11- AUDIO
12- GND AUDIO
Sagem MC959
Secret Codes
MC959
in main menu press * for hot-menu:
lcd, led, vibra, tests, imei, software
versions, battery voltage
Type MENU – 5 – 1 – 1 – # to enter
Engineering menu on SAGEM (RC-712, 721, 815 and 815 plus) phones.
Panasonic G500
IEMI:
To view IMEI number *#06#
——————————————————————————–
PINOUTS
1 – Ground
2 – TX_Audio
3 – Audio_Ground
4 – HF_ON (L=ON) -> L=H/F ON
5 – AOP_Sense <- Data Adaptor Select
6 – Serial_Up <- UART up
(9600,33.8kbps)
7 – Serial_Down -> UART down
8 – External_Power <- POWER FOR
CHARGING
9 – Ground
10 – RX_Audio
11 – Radio_Mute -> L=MUTE
12 – HF_Sense <- L=H/F MODE
13 – Reserved L=FLASH WRITE ENABLE
14 – Ignition <- H=ON
15 – Logic_Power -> H=HANDSET ON
16 – PAON -> Power Amplifier Control
Signal.
Mitsubishi MT- D30
Secret Codes
Monitor mode: Hold C and press 379
Secret menu: Hold C and press 987
Version number: Hold C and press 597
Phase1 and 2 : Hold C and press 499
Warm start : Hold C and press 179
Instant turn off: Hold C and press 999
Unlock menu: Hold C and press 787090
Mitsubishi Trium
*#0000# to reset the phones menu-language
to natural language, set initially by the distributor.
*#06# for checking the IMEI (International
Mobile Equipment Identity)
hold * then 5806 – show software version
hold * then 5807 – a littel bit diffrent
hold * then 5472 – Testmode for datacable
(it seems so)
hold * then 4329 – Activate and
deactivate NETMONITOR
hold * then 621342 – Activate and
deactivate another NETMONITOR
hold * then 3926 – shutdown
SP lock
You can turn around the lock routin by
entering **04*PIN*PIN*PIN# now the secretcode change was applied and the
software turns back to main menue. It works not on all triums, only on thos
with older sofware versions.
SIEMENS S1 / S3 / S3 COM / S4
To view the software date and else with
S3 com, S4, S4Power
press with SIM removed *#06# and left
softkey.
To view some other stuff with S4Power
press with SIM removed *#06# and left
softkey twice.
To view the software date with S3 com,
S4, S4Power
press with SIM installed menu 98 and left
softkey twice.
ACTIVATE MONITOR MODE
Siemens S1/S3
Menu, 9 (Phone Options), 7 (Phone
Status), Left Display Button (left MENU key),
5553756, HangUp Button (Red HandSet key)
Siemens S3 COM/S4
Menu, 9 (Phone Options), 7 (Phone
Status), Left Display Button
(left MENU key), 7684666, HangUp Button
(Red HandSet key)
Note: Now Monitor should appear at the
bottom of the Network Options menu.
MONITOR MODE
Pressing the right Display Button when in
monitor mode will toggle into 1 and 2 modes
Pressing the right Display Button when in
monitor mode will show a
list of the six cells with the strongest
signals.
Test Mode Indicators: (* = only available
when call in progress )
CH Channel Number
RX Signal Strength (dB)
N NCC (Colour Code)
B BCC (Colour Code)
CI Cell ID (in Hex)
C1+ How long before phone does forced
hand over.(see RX and RXAM)
LAI Location Area Identity. Display
Network ID code(42F010 = 240.01) and MSC
TXPWR Transmit Power (dB)
RXAM Receive signal strength cut-off
point
TS* Time Slot Number
TA* Timing Advance. Distance from tower
in Km X 2
PL* Power Level
SIEMENS S1
Here’s a trick to play Tetris, also known
as Klotz on a Siemens S1.
Turn the phone on. Enter PIN. Before the
telephone has logged in to the
your GSM net do the following steps.
1: Choose F 9 (function settings)
2: Choose send own number and push the
right button for choose.
3: Push 9
USE 2 as < and 8 as > , rotate the
klotz with 5 and drop with 4.
